64 lines
1.8 KiB
C++
64 lines
1.8 KiB
C++
#include <ESP32CAN.h>
|
|
#include <CAN_config.h>
|
|
|
|
CAN_device_t CAN_cfg; // CAN Config
|
|
unsigned long previousMillis = 0; // will store last time a CAN Message was send
|
|
const int interval = 1000; // interval at which send CAN Messages (milliseconds)
|
|
const int rx_queue_size = 10; // Receive Queue size
|
|
|
|
void setup() {
|
|
Serial.begin(115200);
|
|
Serial.println("Basic Demo - ESP32-Arduino-CAN");
|
|
CAN_cfg.speed = CAN_SPEED_125KBPS;
|
|
CAN_cfg.tx_pin_id = GPIO_NUM_5;
|
|
CAN_cfg.rx_pin_id = GPIO_NUM_4;
|
|
CAN_cfg.rx_queue = xQueueCreate(rx_queue_size, sizeof(CAN_frame_t));
|
|
// Init CAN Module
|
|
ESP32Can.CANInit();
|
|
}
|
|
|
|
void loop() {
|
|
|
|
CAN_frame_t rx_frame;
|
|
|
|
unsigned long currentMillis = millis();
|
|
|
|
// Receive next CAN frame from queue
|
|
if (xQueueReceive(CAN_cfg.rx_queue, &rx_frame, 3 * portTICK_PERIOD_MS) == pdTRUE) {
|
|
|
|
if (rx_frame.FIR.B.FF == CAN_frame_std) {
|
|
printf("New standard frame");
|
|
}
|
|
else {
|
|
printf("New extended frame");
|
|
}
|
|
|
|
if (rx_frame.FIR.B.RTR == CAN_RTR) {
|
|
printf(" RTR from 0x%08X, DLC %d\r\n", rx_frame.MsgID, rx_frame.FIR.B.DLC);
|
|
}
|
|
else {
|
|
printf(" from 0x%08X, DLC %d, Data ", rx_frame.MsgID, rx_frame.FIR.B.DLC);
|
|
for (int i = 0; i < rx_frame.FIR.B.DLC; i++) {
|
|
printf("0x%02X ", rx_frame.data.u8[i]);
|
|
}
|
|
printf("\n");
|
|
}
|
|
}
|
|
// Send CAN Message
|
|
if (currentMillis - previousMillis >= interval) {
|
|
previousMillis = currentMillis;
|
|
CAN_frame_t tx_frame;
|
|
tx_frame.FIR.B.FF = CAN_frame_std;
|
|
tx_frame.MsgID = 0x001;
|
|
tx_frame.FIR.B.DLC = 8;
|
|
tx_frame.data.u8[0] = 0x00;
|
|
tx_frame.data.u8[1] = 0x01;
|
|
tx_frame.data.u8[2] = 0x02;
|
|
tx_frame.data.u8[3] = 0x03;
|
|
tx_frame.data.u8[4] = 0x04;
|
|
tx_frame.data.u8[5] = 0x05;
|
|
tx_frame.data.u8[6] = 0x06;
|
|
tx_frame.data.u8[7] = 0x07;
|
|
ESP32Can.CANWriteFrame(&tx_frame);
|
|
}
|
|
}
|