added some example sketchs

examples/EthernetHTTPS/EthernetHTTPS.ino

@@ -0,0 +1,152 @@
+/*
+  Web client
+
+ This sketch connects to a website (http://www.arduino.cc/asciilogo.txt)
+ using an Arduino Wiznet Ethernet shield.
+
+ Circuit:
+ * Ethernet shield attached to pins 10, 11, 12, 13
+
+ created 18 Dec 2009
+ by David A. Mellis
+ modified 9 Apr 2012
+ by Noah Koontz, based on work by Adrian McEwen and Tom Igoe
+
+ */
+
+ // NOTE: The Ethernet library MUST be modified to use this example!
+ // For more detailed instructions check out https://github.com/OPEnSLab-OSU/SSLClient#sslclient-with-ethernet
+
+#include <SPI.h>
+#include <Ethernet.h>
+#include <SSLClient.h>
+#include "trust_anchors.h"
+
+// Enter a MAC address for your controller below.
+// Newer Ethernet shields have a MAC address printed on a sticker on the shield
+byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
+
+// if you don't want to use DNS (and reduce your sketch size)
+// use the numeric IP instead of the name for the server:
+//IPAddress server(54,85,55,79);  // numeric IP for Google (no DNS)
+const char server[] = "www.arduino.cc";    // name address for Arduino (using DNS)
+const char server_host[] = "www.arduino.cc"; // leave this alone, change only above two
+
+// Set the static IP address to use if the DHCP fails to assign
+IPAddress ip(192, 168, 0, 177);
+IPAddress myDns(8, 8, 8, 8);
+
+// Choose the analog pin to get semi-random data from for SSL
+// Pick a pin that's not connected or attached to a randomish voltage source
+const int rand_pin = A7;
+
+// Initialize the SSL client library
+// We input an EthernetClient, our trust anchors, and the analog pin
+SSLClient<EthernetClient> client(EthernetClient(), TAs, (size_t)TAs_NUM, rand_pin);
+// Variables to measure the speed
+unsigned long beginMicros, endMicros;
+unsigned long byteCount = 0;
+bool printWebData = true;  // set to false for better speed measurement
+
+void setup() {
+  // You can use Ethernet.init(pin) to configure the CS pin
+  Ethernet.init(10);  // Most Arduino shields
+  //Ethernet.init(5);   // MKR ETH shield
+  //Ethernet.init(0);   // Teensy 2.0
+  //Ethernet.init(20);  // Teensy++ 2.0
+  //Ethernet.init(15);  // ESP8266 with Adafruit Featherwing Ethernet
+  //Ethernet.init(33);  // ESP32 with Adafruit Featherwing Ethernet
+
+  // Open serial communications and wait for port to open:
+  Serial.begin(115200);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for native USB port only
+  }
+  
+  // start the Ethernet connection:
+  Serial.println("Initialize Ethernet with DHCP:");
+  if (Ethernet.begin(mac) == 0) {
+    Serial.println("Failed to configure Ethernet using DHCP");
+    // Check for Ethernet hardware present
+    if (Ethernet.hardwareStatus() == EthernetNoHardware) {
+      Serial.println("Ethernet shield was not found.  Sorry, can't run without hardware. :(");
+      while (true) {
+        delay(1); // do nothing, no point running without Ethernet hardware
+      }
+    }
+    if (Ethernet.linkStatus() == LinkOFF) {
+      Serial.println("Ethernet cable is not connected.");
+    }
+    // try to configure using IP address instead of DHCP:
+    Ethernet.begin(mac, ip, myDns);
+  } else {
+    Serial.print("  DHCP assigned IP ");
+    Serial.println(Ethernet.localIP());
+  }
+  // give the Ethernet shield a second to initialize:
+  delay(2000);
+  
+  Serial.print("connecting to ");
+  Serial.print(server);
+  Serial.println("...");
+
+  // if you get a connection, report back via serial:
+  auto start = millis();
+  // specify the server and port, 443 is the standard port for HTTPS
+  if (client.connect(server, 443)) {
+    auto time = millis() - start;
+    Serial.print("connected to ");
+    Serial.println(client.remoteIP());
+    Serial.print("Took: ");
+    Serial.println(time);
+    // Make a HTTP request:
+    client.println("GET /asciilogo.txt HTTP/1.1");
+    client.println("User-Agent: SSLClientOverEthernet");
+    client.print("Host: ");
+    client.println(server_host);
+    client.println("Connection: close");
+    client.println();
+  } else {
+    // if you didn't get a connection to the server:
+    Serial.println("connection failed");
+  }
+  beginMicros = micros();
+}
+
+void loop() {
+  // if there are incoming bytes available
+  // from the server, read them and print them:
+  int len = client.available();
+  if (len > 0) {
+    byte buffer[80];
+    if (len > 80) len = 80;
+    client.read(buffer, len);
+    if (printWebData) {
+      Serial.write(buffer, len); // show in the serial monitor (slows some boards)
+    }
+    byteCount = byteCount + len;
+  }
+
+  // if the server's disconnected, stop the client:
+  if (!client.connected()) {
+    endMicros = micros();
+    Serial.println();
+    Serial.println("disconnecting.");
+    client.stop();
+    Serial.print("Received ");
+    Serial.print(byteCount);
+    Serial.print(" bytes in ");
+    float seconds = (float)(endMicros - beginMicros) / 1000000.0;
+    Serial.print(seconds, 4);
+    float rate = (float)byteCount / seconds / 1000.0;
+    Serial.print(", rate = ");
+    Serial.print(rate);
+    Serial.print(" kbytes/second");
+    Serial.println();
+
+    // do nothing forevermore:
+    while (true) {
+      delay(1);
+    }
+  }
+}

examples/EthernetHTTPS/trust_anchors.h

@@ -0,0 +1,79 @@
+#ifndef _CERTIFICATES_H_
+#define _CERTIFICATES_H_
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/* This file is auto-generated by the pycert_bearssl tool.  Do not change it manually.
+ * Certificates are BearSSL br_x509_trust_anchor format.  Included certs:
+ *
+ * Index:    0
+ * Label:    Starfield Class 2 Certification Authority
+ * Subject:  C=US,O=Starfield Technologies\, Inc.,OU=Starfield Class 2 Certification Authority
+ * Domain(s): www.arduino.cc
+ */
+
+#define TAs_NUM 1
+
+static const unsigned char TA_DN0[] = {
+    0x30, 0x68, 0x31, 0x0b, 0x30, 0x09, 0x06, 0x03, 0x55, 0x04, 0x06, 0x13,
+    0x02, 0x55, 0x53, 0x31, 0x25, 0x30, 0x23, 0x06, 0x03, 0x55, 0x04, 0x0a,
+    0x13, 0x1c, 0x53, 0x74, 0x61, 0x72, 0x66, 0x69, 0x65, 0x6c, 0x64, 0x20,
+    0x54, 0x65, 0x63, 0x68, 0x6e, 0x6f, 0x6c, 0x6f, 0x67, 0x69, 0x65, 0x73,
+    0x2c, 0x20, 0x49, 0x6e, 0x63, 0x2e, 0x31, 0x32, 0x30, 0x30, 0x06, 0x03,
+    0x55, 0x04, 0x0b, 0x13, 0x29, 0x53, 0x74, 0x61, 0x72, 0x66, 0x69, 0x65,
+    0x6c, 0x64, 0x20, 0x43, 0x6c, 0x61, 0x73, 0x73, 0x20, 0x32, 0x20, 0x43,
+    0x65, 0x72, 0x74, 0x69, 0x66, 0x69, 0x63, 0x61, 0x74, 0x69, 0x6f, 0x6e,
+    0x20, 0x41, 0x75, 0x74, 0x68, 0x6f, 0x72, 0x69, 0x74, 0x79,
+};
+
+static const unsigned char TA_RSA_N0[] = {
+    0xb7, 0x32, 0xc8, 0xfe, 0xe9, 0x71, 0xa6, 0x04, 0x85, 0xad, 0x0c, 0x11,
+    0x64, 0xdf, 0xce, 0x4d, 0xef, 0xc8, 0x03, 0x18, 0x87, 0x3f, 0xa1, 0xab,
+    0xfb, 0x3c, 0xa6, 0x9f, 0xf0, 0xc3, 0xa1, 0xda, 0xd4, 0xd8, 0x6e, 0x2b,
+    0x53, 0x90, 0xfb, 0x24, 0xa4, 0x3e, 0x84, 0xf0, 0x9e, 0xe8, 0x5f, 0xec,
+    0xe5, 0x27, 0x44, 0xf5, 0x28, 0xa6, 0x3f, 0x7b, 0xde, 0xe0, 0x2a, 0xf0,
+    0xc8, 0xaf, 0x53, 0x2f, 0x9e, 0xca, 0x05, 0x01, 0x93, 0x1e, 0x8f, 0x66,
+    0x1c, 0x39, 0xa7, 0x4d, 0xfa, 0x5a, 0xb6, 0x73, 0x04, 0x25, 0x66, 0xeb,
+    0x77, 0x7f, 0xe7, 0x59, 0xc6, 0x4a, 0x99, 0x25, 0x14, 0x54, 0xeb, 0x26,
+    0xc7, 0xf3, 0x7f, 0x19, 0xd5, 0x30, 0x70, 0x8f, 0xaf, 0xb0, 0x46, 0x2a,
+    0xff, 0xad, 0xeb, 0x29, 0xed, 0xd7, 0x9f, 0xaa, 0x04, 0x87, 0xa3, 0xd4,
+    0xf9, 0x89, 0xa5, 0x34, 0x5f, 0xdb, 0x43, 0x91, 0x82, 0x36, 0xd9, 0x66,
+    0x3c, 0xb1, 0xb8, 0xb9, 0x82, 0xfd, 0x9c, 0x3a, 0x3e, 0x10, 0xc8, 0x3b,
+    0xef, 0x06, 0x65, 0x66, 0x7a, 0x9b, 0x19, 0x18, 0x3d, 0xff, 0x71, 0x51,
+    0x3c, 0x30, 0x2e, 0x5f, 0xbe, 0x3d, 0x77, 0x73, 0xb2, 0x5d, 0x06, 0x6c,
+    0xc3, 0x23, 0x56, 0x9a, 0x2b, 0x85, 0x26, 0x92, 0x1c, 0xa7, 0x02, 0xb3,
+    0xe4, 0x3f, 0x0d, 0xaf, 0x08, 0x79, 0x82, 0xb8, 0x36, 0x3d, 0xea, 0x9c,
+    0xd3, 0x35, 0xb3, 0xbc, 0x69, 0xca, 0xf5, 0xcc, 0x9d, 0xe8, 0xfd, 0x64,
+    0x8d, 0x17, 0x80, 0x33, 0x6e, 0x5e, 0x4a, 0x5d, 0x99, 0xc9, 0x1e, 0x87,
+    0xb4, 0x9d, 0x1a, 0xc0, 0xd5, 0x6e, 0x13, 0x35, 0x23, 0x5e, 0xdf, 0x9b,
+    0x5f, 0x3d, 0xef, 0xd6, 0xf7, 0x76, 0xc2, 0xea, 0x3e, 0xbb, 0x78, 0x0d,
+    0x1c, 0x42, 0x67, 0x6b, 0x04, 0xd8, 0xf8, 0xd6, 0xda, 0x6f, 0x8b, 0xf2,
+    0x44, 0xa0, 0x01, 0xab,
+};
+
+static const unsigned char TA_RSA_E0[] = {
+    0x03,
+};
+
+static const br_x509_trust_anchor TAs[] = {
+    {
+        { (unsigned char *)TA_DN0, sizeof TA_DN0 },
+        BR_X509_TA_CA,
+        {
+            BR_KEYTYPE_RSA,
+            { .rsa = {
+                (unsigned char *)TA_RSA_N0, sizeof TA_RSA_N0,
+                (unsigned char *)TA_RSA_E0, sizeof TA_RSA_E0,
+            } }
+        }
+    },
+};
+
+#ifdef __cplusplus
+} /* extern "C" */
+#endif
+
+#endif /* ifndef _CERTIFICATES_H_ */

examples/EthernetMultiHTTPS/EthernetMultiHTTPS.ino

@@ -0,0 +1,167 @@
+/*
+  Multi Domain HTTPS Client
+
+ This sketch connects to a website (http://www.arduino.cc/asciilogo.txt)
+ using an Arduino Wiznet Ethernet shield.
+
+ Circuit:
+ * Ethernet shield attached to pins 10, 11, 12, 13
+
+ created 18 Dec 2009
+ by David A. Mellis
+ modified 9 Apr 2012
+ by Noah Koontz, based on work by Adrian McEwen and Tom Igoe
+
+ */
+
+
+ // NOTE: The Ethernet library MUST be modified to use this example!
+ // For more detailed instructions check out https://github.com/OPEnSLab-OSU/SSLClient#sslclient-with-ethernet
+
+#include <SPI.h>
+#include <Ethernet.h>
+#include <SSLClient.h>
+#include "trustanchors.h"
+// Enter a MAC address for your controller below.
+// Newer Ethernet shields have a MAC address printed on a sticker on the shield
+byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
+
+// the two domains we want to query
+char server1[] = "www.arduino.cc";
+char server2[] = "www.cloudflare.com";
+// and the queries we want to send to them
+char query1[] = "GET /asciilogo.txt HTTP/1.1";
+char query2[] = "GET /cdn-cgi/trace HTTP/1.1";
+
+// Set the static IP address to use if the DHCP fails to assign
+IPAddress ip(192, 168, 0, 177);
+IPAddress myDns(8, 8, 8, 8);
+
+// Choose the analog pin to get semi-random data from for SSL
+// Pick a pin that's not connected or attached to a randomish voltage source
+const int rand_pin = A7;
+
+// Initialize the SSL client library
+// We input an EthernetClient, our trust anchors, and the analog pin
+// Additionally specify that we want to store 2 sessions since we are connecting to 2 domains
+SSLClient<EthernetClient, 2> client(EthernetClient(), TAs, (size_t)TAs_NUM, rand_pin);
+// Variables to measure the speed
+unsigned long beginMicros, endMicros;
+unsigned long byteCount = 0;
+bool printWebData = true;  // set to false for better speed measurement
+
+void setup() {
+  // You can use Ethernet.init(pin) to configure the CS pin
+  Ethernet.init(10);  // Most Arduino shields
+  //Ethernet.init(5);   // MKR ETH shield
+  //Ethernet.init(0);   // Teensy 2.0
+  //Ethernet.init(20);  // Teensy++ 2.0
+  //Ethernet.init(15);  // ESP8266 with Adafruit Featherwing Ethernet
+  //Ethernet.init(33);  // ESP32 with Adafruit Featherwing Ethernet
+
+  // Open serial communications and wait for port to open:
+  Serial.begin(115200);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for native USB port only
+  }
+  
+  // start the Ethernet connection:
+  Serial.println("Initialize Ethernet with DHCP:");
+  if (Ethernet.begin(mac) == 0) {
+    Serial.println("Failed to configure Ethernet using DHCP");
+    // Check for Ethernet hardware present
+    if (Ethernet.hardwareStatus() == EthernetNoHardware) {
+      Serial.println("Ethernet shield was not found.  Sorry, can't run without hardware. :(");
+      while (true) {
+        delay(1); // do nothing, no point running without Ethernet hardware
+      }
+    }
+    if (Ethernet.linkStatus() == LinkOFF) {
+      Serial.println("Ethernet cable is not connected.");
+    }
+    // try to congifure using IP address instead of DHCP:
+    Ethernet.begin(mac, ip, myDns);
+  } else {
+    Serial.print("  DHCP assigned IP ");
+    Serial.println(Ethernet.localIP());
+  }
+  // give the Ethernet shield a second to initialize:
+  delay(2000);
+  // connect!
+  connectSSL();
+}
+
+void loop() {
+  // if there are incoming bytes available
+  // from the server, read them and print them:
+  int len = client.available();
+  if (len > 0) {
+    byte buffer[80];
+    if (len > 80) len = 80;
+    client.read(buffer, len);
+    if (printWebData) {
+      Serial.write(buffer, len); // show in the serial monitor (slows some boards)
+    }
+    byteCount = byteCount + len;
+  }
+
+  // if the server's disconnected, stop the client:
+  if (!client.connected()) {
+    endMicros = micros();
+    Serial.println();
+    Serial.println("disconnecting.");
+    client.stop();
+    Serial.print("Received ");
+    Serial.print(byteCount);
+    Serial.print(" bytes in ");
+    float seconds = (float)(endMicros - beginMicros) / 1000000.0;
+    Serial.print(seconds, 4);
+    float rate = (float)byteCount / seconds / 1000.0;
+    Serial.print(", rate = ");
+    Serial.print(rate);
+    Serial.print(" kbytes/second");
+    Serial.println();
+
+    //quick delay
+    delay(1000);
+    // connect again!
+    connectSSL();
+  }
+}
+
+bool r = false;
+
+void connectSSL() {
+  // cycle the server we want to connect to back and forth
+  char* server;
+  if (r) server = server1;
+  else server = server2;
+  r = !r;
+  
+  Serial.print("connecting to ");
+  Serial.print(server);
+  Serial.println("...");
+
+  // if you get a connection, report back via serial:
+  auto start = millis();
+  if (client.connect(server, 443)) {
+    auto time = millis() - start;
+    Serial.print("connected to ");
+    Serial.println(client.remoteIP());
+    Serial.print("Took: ");
+    Serial.println(time);
+    // Make a HTTP request:
+    if (server == server1) client.println(query1);
+    else client.println(query2);
+    client.println("User-Agent: SSLClientOverEthernet");
+    client.print("Host: ");
+    client.println(server);
+    client.println("Connection: close");
+    client.println();
+    client.flush();
+  } else {
+    // if you didn't get a connection to the server:
+    Serial.println("connection failed");
+  }
+  beginMicros = micros();
+}

examples/EthernetMultiHTTPS/trustanchors.h

@@ -0,0 +1,137 @@
+#ifndef _CERTIFICATES_H_
+#define _CERTIFICATES_H_
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/* This file is auto-generated by the pycert_bearssl tool.  Do not change it manually.
+ * Certificates are BearSSL br_x509_trust_anchor format.  Included certs:
+ *
+ * Index:    0
+ * Label:    Starfield Class 2 Certification Authority
+ * Subject:  C=US,O=Starfield Technologies\, Inc.,OU=Starfield Class 2 Certification Authority
+ * Domain(s): www.arduino.cc
+ * 
+ * Index:    1
+ * Label:    DigiCert High Assurance EV Root CA
+ * Subject:  C=US,O=DigiCert Inc,OU=www.digicert.com,CN=DigiCert High Assurance EV Root CA
+ * Domain(s): www.cloudflare.com
+ */
+
+#define TAs_NUM 2
+
+static const unsigned char TA_DN0[] = {
+    0x30, 0x68, 0x31, 0x0b, 0x30, 0x09, 0x06, 0x03, 0x55, 0x04, 0x06, 0x13,
+    0x02, 0x55, 0x53, 0x31, 0x25, 0x30, 0x23, 0x06, 0x03, 0x55, 0x04, 0x0a,
+    0x13, 0x1c, 0x53, 0x74, 0x61, 0x72, 0x66, 0x69, 0x65, 0x6c, 0x64, 0x20,
+    0x54, 0x65, 0x63, 0x68, 0x6e, 0x6f, 0x6c, 0x6f, 0x67, 0x69, 0x65, 0x73,
+    0x2c, 0x20, 0x49, 0x6e, 0x63, 0x2e, 0x31, 0x32, 0x30, 0x30, 0x06, 0x03,
+    0x55, 0x04, 0x0b, 0x13, 0x29, 0x53, 0x74, 0x61, 0x72, 0x66, 0x69, 0x65,
+    0x6c, 0x64, 0x20, 0x43, 0x6c, 0x61, 0x73, 0x73, 0x20, 0x32, 0x20, 0x43,
+    0x65, 0x72, 0x74, 0x69, 0x66, 0x69, 0x63, 0x61, 0x74, 0x69, 0x6f, 0x6e,
+    0x20, 0x41, 0x75, 0x74, 0x68, 0x6f, 0x72, 0x69, 0x74, 0x79,
+};
+
+static const unsigned char TA_RSA_N0[] = {
+    0xb7, 0x32, 0xc8, 0xfe, 0xe9, 0x71, 0xa6, 0x04, 0x85, 0xad, 0x0c, 0x11,
+    0x64, 0xdf, 0xce, 0x4d, 0xef, 0xc8, 0x03, 0x18, 0x87, 0x3f, 0xa1, 0xab,
+    0xfb, 0x3c, 0xa6, 0x9f, 0xf0, 0xc3, 0xa1, 0xda, 0xd4, 0xd8, 0x6e, 0x2b,
+    0x53, 0x90, 0xfb, 0x24, 0xa4, 0x3e, 0x84, 0xf0, 0x9e, 0xe8, 0x5f, 0xec,
+    0xe5, 0x27, 0x44, 0xf5, 0x28, 0xa6, 0x3f, 0x7b, 0xde, 0xe0, 0x2a, 0xf0,
+    0xc8, 0xaf, 0x53, 0x2f, 0x9e, 0xca, 0x05, 0x01, 0x93, 0x1e, 0x8f, 0x66,
+    0x1c, 0x39, 0xa7, 0x4d, 0xfa, 0x5a, 0xb6, 0x73, 0x04, 0x25, 0x66, 0xeb,
+    0x77, 0x7f, 0xe7, 0x59, 0xc6, 0x4a, 0x99, 0x25, 0x14, 0x54, 0xeb, 0x26,
+    0xc7, 0xf3, 0x7f, 0x19, 0xd5, 0x30, 0x70, 0x8f, 0xaf, 0xb0, 0x46, 0x2a,
+    0xff, 0xad, 0xeb, 0x29, 0xed, 0xd7, 0x9f, 0xaa, 0x04, 0x87, 0xa3, 0xd4,
+    0xf9, 0x89, 0xa5, 0x34, 0x5f, 0xdb, 0x43, 0x91, 0x82, 0x36, 0xd9, 0x66,
+    0x3c, 0xb1, 0xb8, 0xb9, 0x82, 0xfd, 0x9c, 0x3a, 0x3e, 0x10, 0xc8, 0x3b,
+    0xef, 0x06, 0x65, 0x66, 0x7a, 0x9b, 0x19, 0x18, 0x3d, 0xff, 0x71, 0x51,
+    0x3c, 0x30, 0x2e, 0x5f, 0xbe, 0x3d, 0x77, 0x73, 0xb2, 0x5d, 0x06, 0x6c,
+    0xc3, 0x23, 0x56, 0x9a, 0x2b, 0x85, 0x26, 0x92, 0x1c, 0xa7, 0x02, 0xb3,
+    0xe4, 0x3f, 0x0d, 0xaf, 0x08, 0x79, 0x82, 0xb8, 0x36, 0x3d, 0xea, 0x9c,
+    0xd3, 0x35, 0xb3, 0xbc, 0x69, 0xca, 0xf5, 0xcc, 0x9d, 0xe8, 0xfd, 0x64,
+    0x8d, 0x17, 0x80, 0x33, 0x6e, 0x5e, 0x4a, 0x5d, 0x99, 0xc9, 0x1e, 0x87,
+    0xb4, 0x9d, 0x1a, 0xc0, 0xd5, 0x6e, 0x13, 0x35, 0x23, 0x5e, 0xdf, 0x9b,
+    0x5f, 0x3d, 0xef, 0xd6, 0xf7, 0x76, 0xc2, 0xea, 0x3e, 0xbb, 0x78, 0x0d,
+    0x1c, 0x42, 0x67, 0x6b, 0x04, 0xd8, 0xf8, 0xd6, 0xda, 0x6f, 0x8b, 0xf2,
+    0x44, 0xa0, 0x01, 0xab,
+};
+
+static const unsigned char TA_RSA_E0[] = {
+    0x03,
+};
+
+static const unsigned char TA_DN1[] = {
+    0x30, 0x6c, 0x31, 0x0b, 0x30, 0x09, 0x06, 0x03, 0x55, 0x04, 0x06, 0x13,
+    0x02, 0x55, 0x53, 0x31, 0x15, 0x30, 0x13, 0x06, 0x03, 0x55, 0x04, 0x0a,
+    0x13, 0x0c, 0x44, 0x69, 0x67, 0x69, 0x43, 0x65, 0x72, 0x74, 0x20, 0x49,
+    0x6e, 0x63, 0x31, 0x19, 0x30, 0x17, 0x06, 0x03, 0x55, 0x04, 0x0b, 0x13,
+    0x10, 0x77, 0x77, 0x77, 0x2e, 0x64, 0x69, 0x67, 0x69, 0x63, 0x65, 0x72,
+    0x74, 0x2e, 0x63, 0x6f, 0x6d, 0x31, 0x2b, 0x30, 0x29, 0x06, 0x03, 0x55,
+    0x04, 0x03, 0x13, 0x22, 0x44, 0x69, 0x67, 0x69, 0x43, 0x65, 0x72, 0x74,
+    0x20, 0x48, 0x69, 0x67, 0x68, 0x20, 0x41, 0x73, 0x73, 0x75, 0x72, 0x61,
+    0x6e, 0x63, 0x65, 0x20, 0x45, 0x56, 0x20, 0x52, 0x6f, 0x6f, 0x74, 0x20,
+    0x43, 0x41,
+};
+
+static const unsigned char TA_RSA_N1[] = {
+    0xc6, 0xcc, 0xe5, 0x73, 0xe6, 0xfb, 0xd4, 0xbb, 0xe5, 0x2d, 0x2d, 0x32,
+    0xa6, 0xdf, 0xe5, 0x81, 0x3f, 0xc9, 0xcd, 0x25, 0x49, 0xb6, 0x71, 0x2a,
+    0xc3, 0xd5, 0x94, 0x34, 0x67, 0xa2, 0x0a, 0x1c, 0xb0, 0x5f, 0x69, 0xa6,
+    0x40, 0xb1, 0xc4, 0xb7, 0xb2, 0x8f, 0xd0, 0x98, 0xa4, 0xa9, 0x41, 0x59,
+    0x3a, 0xd3, 0xdc, 0x94, 0xd6, 0x3c, 0xdb, 0x74, 0x38, 0xa4, 0x4a, 0xcc,
+    0x4d, 0x25, 0x82, 0xf7, 0x4a, 0xa5, 0x53, 0x12, 0x38, 0xee, 0xf3, 0x49,
+    0x6d, 0x71, 0x91, 0x7e, 0x63, 0xb6, 0xab, 0xa6, 0x5f, 0xc3, 0xa4, 0x84,
+    0xf8, 0x4f, 0x62, 0x51, 0xbe, 0xf8, 0xc5, 0xec, 0xdb, 0x38, 0x92, 0xe3,
+    0x06, 0xe5, 0x08, 0x91, 0x0c, 0xc4, 0x28, 0x41, 0x55, 0xfb, 0xcb, 0x5a,
+    0x89, 0x15, 0x7e, 0x71, 0xe8, 0x35, 0xbf, 0x4d, 0x72, 0x09, 0x3d, 0xbe,
+    0x3a, 0x38, 0x50, 0x5b, 0x77, 0x31, 0x1b, 0x8d, 0xb3, 0xc7, 0x24, 0x45,
+    0x9a, 0xa7, 0xac, 0x6d, 0x00, 0x14, 0x5a, 0x04, 0xb7, 0xba, 0x13, 0xeb,
+    0x51, 0x0a, 0x98, 0x41, 0x41, 0x22, 0x4e, 0x65, 0x61, 0x87, 0x81, 0x41,
+    0x50, 0xa6, 0x79, 0x5c, 0x89, 0xde, 0x19, 0x4a, 0x57, 0xd5, 0x2e, 0xe6,
+    0x5d, 0x1c, 0x53, 0x2c, 0x7e, 0x98, 0xcd, 0x1a, 0x06, 0x16, 0xa4, 0x68,
+    0x73, 0xd0, 0x34, 0x04, 0x13, 0x5c, 0xa1, 0x71, 0xd3, 0x5a, 0x7c, 0x55,
+    0xdb, 0x5e, 0x64, 0xe1, 0x37, 0x87, 0x30, 0x56, 0x04, 0xe5, 0x11, 0xb4,
+    0x29, 0x80, 0x12, 0xf1, 0x79, 0x39, 0x88, 0xa2, 0x02, 0x11, 0x7c, 0x27,
+    0x66, 0xb7, 0x88, 0xb7, 0x78, 0xf2, 0xca, 0x0a, 0xa8, 0x38, 0xab, 0x0a,
+    0x64, 0xc2, 0xbf, 0x66, 0x5d, 0x95, 0x84, 0xc1, 0xa1, 0x25, 0x1e, 0x87,
+    0x5d, 0x1a, 0x50, 0x0b, 0x20, 0x12, 0xcc, 0x41, 0xbb, 0x6e, 0x0b, 0x51,
+    0x38, 0xb8, 0x4b, 0xcb,
+};
+
+static const unsigned char TA_RSA_E1[] = {
+    0x01, 0x00, 0x01,
+};
+
+static const br_x509_trust_anchor TAs[] = {
+    {
+        { (unsigned char *)TA_DN0, sizeof TA_DN0 },
+        BR_X509_TA_CA,
+        {
+            BR_KEYTYPE_RSA,
+            { .rsa = {
+                (unsigned char *)TA_RSA_N0, sizeof TA_RSA_N0,
+                (unsigned char *)TA_RSA_E0, sizeof TA_RSA_E0,
+            } }
+        }
+    },
+    {
+        { (unsigned char *)TA_DN1, sizeof TA_DN1 },
+        BR_X509_TA_CA,
+        {
+            BR_KEYTYPE_RSA,
+            { .rsa = {
+                (unsigned char *)TA_RSA_N1, sizeof TA_RSA_N1,
+                (unsigned char *)TA_RSA_E1, sizeof TA_RSA_E1,
+            } }
+        }
+    },
+};
+
+#ifdef __cplusplus
+} /* extern "C" */
+#endif
+
+#endif /* ifndef _CERTIFICATES_H_ */

src/SSLClientImpl.cpp

@@ -343,7 +343,7 @@ int SSLClientImpl::m_start_ssl(const char* host, SSLSession& ssl_ses) {
         setWriteError(SSL_BR_CONNECT_FAIL);
         return 0;
     }
-    // initlalize the SSL socket over the network
+    // initialize the SSL socket over the network
     // normally this would happen in write, but I think it makes
     // a little more structural sense to put it here
     if (m_run_until(BR_SSL_SENDAPP) < 0) {