91 lines
No EOL
3.1 KiB
C++
91 lines
No EOL
3.1 KiB
C++
/*
|
|
Basic MQTT example (with SSL!)
|
|
This sketch demonstrates the basic capabilities of the library.
|
|
It connects to an MQTT server then:
|
|
- publishes "hello world" to the topic "outTopic"
|
|
- subscribes to the topic "inTopic", printing out any messages
|
|
it receives. NB - it assumes the received payloads are strings not binary
|
|
It will reconnect to the server if the connection is lost using a blocking
|
|
reconnect function. See the 'mqtt_reconnect_nonblocking' example for how to
|
|
achieve the same result without blocking the main loop.
|
|
|
|
You will need to populate "certificates.h" with your trust anchors
|
|
(see https://github.com/OPEnSLab-OSU/SSLClient/blob/master/TrustAnchors.md)
|
|
and my_cert/my_key with your certificate/private key pair
|
|
(see https://github.com/OPEnSLab-OSU/SSLClient#mtls).
|
|
*/
|
|
#include <SPI.h>
|
|
#include <EthernetLarge.h>
|
|
#include <SSLClient.h>
|
|
#include "certificates.h" // This file must be regenerated
|
|
#include <PubSubClient.h>
|
|
|
|
const char my_cert[] = "FIXME";
|
|
const char my_key[] = "FIXME";
|
|
SSLClientParameters mTLS = SSLClientParameters::fromPEM(my_cert, sizeof my_cert, my_key, sizeof my_key);
|
|
|
|
byte mac[] = { 0xDE, 0xED, 0xBA, 0xFE, 0xFE, 0xED };
|
|
const char* mqttServer = "broker.example"; // Broker address
|
|
IPAddress ip (192, 168, 1, 2); // Custom client static IP
|
|
|
|
void callback(char* topic, byte* payload, unsigned int length) {
|
|
Serial.print("Message arrived [");
|
|
Serial.print(topic);
|
|
Serial.print("] ");
|
|
for (int i=0;i<length;i++) {
|
|
Serial.print((char)payload[i]);
|
|
}
|
|
Serial.println();
|
|
}
|
|
|
|
EthernetClient ethClient;
|
|
SSLClient ethClientSSL(ethClient, TAs, (size_t)TAs_NUM, A5);
|
|
PubSubClient client(mqttServer, 8883, callback, ethClientSSL);
|
|
|
|
void reconnect() {
|
|
// Loop until we're reconnected
|
|
while (!client.connected()) {
|
|
Serial.print("Attempting MQTT connection...");
|
|
// Attempt to connect
|
|
if (client.connect("arduinoClient")) {
|
|
Serial.println("connected");
|
|
// Once connected, publish an announcement...
|
|
client.publish("outTopic","hello world");
|
|
// This is a workaround to address https://github.com/OPEnSLab-OSU/SSLClient/issues/9
|
|
ethClientSSL.flush();
|
|
// ... and resubscribe
|
|
client.subscribe("inTopic");
|
|
// This is a workaround to address https://github.com/OPEnSLab-OSU/SSLClient/issues/9
|
|
ethClientSSL.flush();
|
|
} else {
|
|
Serial.print("failed, rc=");
|
|
Serial.print(client.state());
|
|
Serial.println(" try again in 5 seconds");
|
|
// Wait 5 seconds before retrying
|
|
delay(5000);
|
|
}
|
|
}
|
|
}
|
|
|
|
void setup(){
|
|
// Start Serial
|
|
Serial.begin(115200);
|
|
while(!Serial);
|
|
// Enable mutual TLS with SSLClient
|
|
ethClientSSL.setMutualAuthParams(mTLS);
|
|
// You can use Ethernet.init(pin) to configure the CS pin
|
|
Ethernet.init(10); // Most Arduino shields
|
|
//Ethernet.init(5); // MKR ETH shield
|
|
//Ethernet.init(0); // Teensy 2.0
|
|
//Ethernet.init(20); // Teensy++ 2.0
|
|
//Ethernet.init(15); // ESP8266 with Adafruit Featherwing Ethernet
|
|
//Ethernet.init(33); // ESP32 with Adafruit Featherwing Ethernet
|
|
Ethernet.begin(mac, ip);
|
|
}
|
|
|
|
void loop(){
|
|
if (!client.connected()) {
|
|
reconnect();
|
|
}
|
|
client.loop();
|
|
} |